Follow us



Advance Fitting is an established producer and supplier of 904L Stainless Steel ub6 Flanges. These flanges are made from a nickel chromium austenitic stainless steel that includes 23% nickel, 19% chromium, carbon, manganese, silicon, phosphorus, sulphur, copper, and 4% molybdenum. A trusted source for high-quality 904L Stainless Steel ub6 Flanges of all sizes, Advance Fitting is a frontrunner in the global market. Strong corrosion resistance and high strength are provided by the alloy's nickel, chromium, and molybdenum content. One of the mechanical requirements is a minimum yield strength of 220 MPa and a minimum tensile strength of 490 MPa. The material has a high melting point of 1300 degrees Celsius. The end of the pipe is sealed permanently with the help of the Alloy 904L Blind Flange. There is less carbon in this iteration of 904 steel than in previous ones. These flanges are easy to weld and form because carbide precipitation occurs during welding, eliminating the potential for grain formation and intergranular corrosion.


The plate on the SS 904L ub6 Plate Flange extends the surface area available for welding, bolting, and other forms of fastening. Flanges meet all relevant international standards, including but not limited to ASTM B649. These flanges come in a wide variety of sizes and pressure ratings, from 1/2 inch up to 48 inches. A weld neck and a raised face characterise the ASME SA182 SS 904L WNRF Flanges. These flanges' necks and faces are welded for further strength, and their pressure classes go from 150 to 2500 and PN6 to PN64.

Flanges like this have a wide range of applications, from the energy industry to the pharmaceutical and petrochemical industries. Heat exchangers, boilers, condensers, the paper and pulp industries, offshore oil drilling, and the manufacture of chemical and saltwater equipment all make use of SS DIN 1.4539 Nippo Flanges.


Developed by Metalbulls

Adfit-2022 -All Rights Reserved.